Custom Solid Brass Craftsman Square-Lattice Floor Register

Cut from heavy 1/8-inch (0.125") solid C260 brass plate for non-standard floor duct openings that stamped hardware-store vents cannot span without flexing.

• 0.125" (1/8") walk-on solid C260 brass plate
• 56–62% open airflow area across custom sizes
• Drawn and fiber-laser cut to 1/16" increments in 4–6 business days

Older Craftsman, Victorian, and Colonial homes frequently have floor duct boots cut to carpenter framing spaces rather than modern 4x10 sheet-metal standards. Each Brandt Register floor grille is drawn in CAD from your exact duct width and height to 1/16 inch, keeping the outermost lattice apertures 1/8 inch inside the duct throat so raw tin edges stay hidden.

Unlike thin stamped registers that dish underfoot, 0.125-inch architectural plate brass carries adult foot traffic across spans up to 14 inches wide with minimum 1/4-inch solid web bars. Ships with matching solid brass flat-head wood screws or unpierced for flush hardwood inlay.